# How to invoice retainer overage: rates, thresholds and client notice

https://krokul.com/en/blog/bill-retainer-overage/ · Krokul Team · Updated 2026-11-10

Account managers and finance managers who sell a monthly package of hours meet the same moment every month, when the client has used more than the package covers. This guide shows how to set the overage rate, choose the thresholds and word the notice, so the extra hours reach an invoice without an argument.

**Short answer.** To invoice retainer overage, set an overage rate in the contract, count hours against the package month by month, and warn the client at 90% used and again at zero. After the month closes, add one line for the extra hours at the overage rate to the package invoice, showing the hours and the dates they were worked.

## When do you need an overage rule for a retainer?

A retainer overage rule is needed as soon as a client can use more hours than the package contains. It is the second half of the package terms described in the guide on [billing for all the work you deliver](https://krokul.com/en/blog/topics/billing-delivered-work/), and the first half is covered in [prepaid support hours](https://krokul.com/en/blog/prepaid-support-hours/).

- A client regularly uses 12 or 13 hours of a 10-hour package, and the extra hours are never invoiced.
- The team keeps working after the package runs out, because nobody knows what the next hour costs.
- A client disputes the overage line on the invoice and says nobody warned them.
- Finance finds out about the extra hours only at month end, from the timesheet.

- **Retainer overage** — Retainer overage is the billable time a client uses above the hours their monthly package includes, priced at a rate set in the contract.
- **Overage rate** — The overage rate is the price of one hour above the package, usually higher than the package price per hour.
- **Threshold** — A threshold is the share of the package used, such as 90% or 100%, at which the client receives a notice.

## How do you set up retainer overage in seven steps?

Retainer overage needs three decisions made before the first hour is logged: the price, the moment of the warning and the way the extra hours are shown on the invoice. The steps below put those decisions in order.

### 1. Work out the package price per hour

Divide the package price by the hours it includes. A £750 package of 10 hours is £75 an hour.

This number is the floor for the overage rate, because the client already pays it for every hour inside the package.

### 2. Set the overage rate above the package price

Choose a rate that covers your cost of an hour with a margin and sits above the package price per hour. In the example the overage rate is £85, which is £10 above the package price.

A higher rate gives the client a reason to renew the package at a larger size, and it gives you a margin on work that interrupts the plan.

### 3. Define what counts as an hour and which month it belongs to

Write down the billable work, the smallest unit of time, such as 15 minutes, and the time zone that closes the month. Hours belong to the month in which they were worked.

Name the work that is never counted against the package, for example a fault in your own delivery.

### 4. Choose the thresholds for the client notice

Use two thresholds. The first is at 90% of the package used, and the second is when the package is exceeded. Add a third rule for large overage, for example approval from the client before the next 5 hours.

The 90% notice gives the client time to decide, and the notice at zero confirms the price of the next hour.

### 5. Write the notice in one template

A good notice has four facts: hours used, hours left, the overage rate and what happens next. Send it by email from the account manager, so the client can reply to a person.

The template in the checklist below can be copied into your mail tool.

### 6. Invoice the overage after the month closes

Add one line to the package invoice, or issue a separate invoice, for the hours above the package at the overage rate. Show the hours, the rate and the period on the line.

Invoicing after the month closes gives a final number, and the notices already sent mean the line holds no surprise.

### 7. Review overage weekly, not only at month end

Overage grows during the month. Check the packages near their limit every week, so the notice goes out when the threshold is crossed and not when the invoice is due.

The guide on [finding delivered work that was never invoiced](https://krokul.com/en/blog/find-unbilled-work/) describes the monthly check that catches what the weekly review missed.

> **Tip.** Put the overage rate in the same clause as the package size. A rate in a separate schedule is the one most often forgotten.

## How do you calculate retainer overage for one month?

Retainer overage for a month is the number of billable hours above the package multiplied by the overage rate. The example below uses a 10-hour package for £750 and an overage rate of £85.

Example: one month of a 10-hour retainer:

| Line | Calculation | Amount |
|---|---|---|
| Package price per hour | £750 ÷ 10 hours | £75 |
| Hours worked in the month | Logged billable hours | 13.5 hours |
| Hours above the package | 13.5 − 10 | 3.5 hours |
| Retainer overage | 3.5 × £85 | £297.50 |
| Invoice total | £750 + £297.50 | £1,047.50 |

Overage = (hours worked − package hours) × overage rate, when hours worked are above the package. If the contract had no overage rate, the 3.5 hours would stay without a price, and the invoice would show £750 while 3.5 hours of work went unpaid.

Example: when the client is told and what they decide:

| Threshold | Hours used | Notice to the client | Client decides |
|---|---|---|---|
| 90% of the package | 9 of 10 | One hour left, then £85 an hour | Add hours or continue at the overage rate |
| Package used up | 10 of 10 | Package used up, the next hour costs £85 | Approve or pause non-urgent work |
| Large overage | 15 of 10 | Five hours above the package, £425 so far | Approve a higher limit or a larger package |

## Which mistakes make retainer overage hard to invoice?

- Leaving the overage rate out of the contract. The extra hours are then either given away or argued about, so write the rate next to the package size.
- Warning the client only on the invoice. The client sees a number they did not expect and challenges every hour, so send a notice at 90% and at zero.
- Setting the overage rate equal to the package price per hour. The package then offers no reason to stay inside it, so keep the overage rate above the package rate.
- Counting hours at month end from memory. The entries come out low, so ask the team to log time the day the work is done.
- Carrying unused hours without a rule. The client expects them to roll over and the provider expects them to expire, so state the rule in one sentence. The guide on work outside the agreed scope covers how to price what the package never covered.

## What should the overage clause and the client notice contain?

Copy the list into the contract or the order form and fill in the numbers. The notice template below the list can go into your mail tool as it is.

- Package size in hours and the package price.
- Overage rate per hour and the period in which it is invoiced.
- Minimum unit of time and the time zone that closes the month.
- Thresholds for the notice, for example 90% and 100%, and who sends it.
- Approval rule for large overage, with the number of hours above which the client approves first.
- Treatment of unused hours at month end.

Notice template. Subject: Support hours for [month]. Body: Hello [name], this month your team has used [X] of [package] hours, which leaves [Y] hours. After the package is used, each further hour is invoiced at [rate] per hour. Tell us if you would like to add hours or pause non-urgent requests.

## How Krokul prices and lists retainer overage

Krokul CRM is a B2B CRM for contract-based companies: deals, projects and profit per client in one system, implemented by integration partners. A project holds the package, the overage rate and the hours in one card, and the overage reaches an invoice without a spreadsheet.

In the Hours block of a project, enter the Hours budget, set the Pool to Per month and fill in the Hourly rate over the pool. Krokul counts the hours of the current calendar month in the company’s time zone, and each new month starts again. When the hours worked exceed the pool, the card shows the hours over and the amount to invoice at your rate. With the rate field empty, the card shows the hours over without an amount.

When the pool is exceeded, Krokul sends the project owner, when one is assigned, a notification that the hour pool is used up, once for that month, for projects in the In progress status. The Projects list also has ready-made filters for pools at 90% or more and for pools already exceeded. The client is not notified by Krokul, so the owner writes the notice from the numbers on the card.

Open Documents, then Unbilled. Hours above a monthly package appear as a row with the client, the project, the date the month began and the amount, with a button that creates the completion certificate. Admins and managers see the screen. A project with hours over and no overage rate shows the reason “no overage rate” in place of the button. The certificate carries one line for the package and one line for the hours above it at the overage rate. Once a live certificate exists for the month, the row disappears from the list. The page on [how Krokul links package hours to invoices](https://krokul.com/en/solutions/projects/) shows where this screen sits among contracts and margin.

![Support package project card: 13.5 of 10 hours this month, 3.5 hours over the pool and £297.50 to invoice](https://krokul.com/img/en/blog/retainer-overage-project-card.webp)

## Frequently asked questions

### What overage rate should I charge?

Charge more than the package price per hour and more than your own cost of an hour. If the package price is £75 an hour, a rate such as £85 keeps the package attractive and gives the overage a margin.

### Should I invoice overage at once or after the month closes?

Invoice it after the month closes, when the number of extra hours is final. Send the notices during the month, so the invoice contains nothing new to the client.

### Can I stop work when the package is used up?

Yes, if the contract says so. Pick one of three outcomes, stop until the client buys more, continue at the overage rate, or ask for approval, and write it next to the package size.

### What if the client refuses to pay the overage?

Show the notices already sent and the hours with their dates, then offer a larger package from next month. A client who received the notice at 90% and at zero has had two chances to decide.

### Do unused hours cancel part of the overage?

Only when the contract says hours carry over. Without a carry-over rule, each month stands alone, so unused hours of one month never offset the overage of another.

---

App: https://app.krokul.com/ · API: https://app.krokul.com/api/v1/docs
